Chimney Repair Cost in Seattle, WA
Based on 42 chimney repair building permits filed in Seattle between 2015 and 2026, the typical declared project value is $10,000, with most landing between $5,000 and $16,750. These are real records from Seattle's public building-permit data, declared job values, not contractor estimates or AI guesses.
No neighbor receipts in Seattle yet. Paste a quote to see how it compares to these permit values, or add what you paid to start the real price record here.
Recent chimney repair permits in Seattle
Actual filings from Seattle's public permit records. Declared job values, not final paid prices.
| Filed | Declared value | Work described |
|---|---|---|
| 2026-04-30 | $8,000 | Construct alterations to remove brick single story chimney and replace with insert subjec |
| 2025-09-16 | $6,000 | Construct alterations to remove existing fireplace and chimney and add laundry/bathroom pa |
| 2025-06-10 | $6,500 | Repair and replace portions of roof chimney and interior finishes for single-family resi |
| 2025-03-08 | $2,000 | Remove chimney and fireplace at existing single family residence subject to field inspect |
| 2025-02-26 | $1,000 | Construct alterations to the chimney of an existing single-family residence subject to fi |
| 2024-06-14 | $20,000 | Demolish existing brick chimney and alterations to the kitchen in a single-family residenc |
| 2024-05-16 | $10,000 | Roof needs to be replaced in front area chimney demo. |
| 2024-04-08 | $25,000 | Construct alterations to kitchen and remove chimney of existing single-family residence p |
| 2024-02-09 | $18,220 | Work Scope: Remove existing roof system and dispose of debris at an approved dump site |
| 2023-07-10 | $5,000 | Remove chimney at exterior wall of single-family residence subject to field inspection. |
| 2021-07-26 | $2,000 | Construct chimney retrofit & "Project Impact" seismic retrofit to existing single-family |
| 2021-06-28 | $17,000 | Remove the chimney and replace with fireplace insert in existing single family residence |
| 2021-06-20 | $25,000 | Interior alterations and chimney removal at existing single family residence subject to f |
| 2021-05-07 | $2,000 | Remove Existing Chimney per subject to field inspection (STFI) |
| 2020-11-03 | $7,500 | Alter existing single family dwelling to remove chimney and load bearing wall and replace |
Paid for chimney repair in Seattle? Your receipt becomes the first real neighbor price on this page.
Add your price →How to read these numbers
A permit's declared value is the job cost the owner or contractor stated when they pulled the permit. It tracks the real cost of the work but can run a bit under what was actually paid, since it often leaves out some labor and finish costs. Treat the range as a grounded starting point. What chimney repair actually costs in Seattle comes down to home size, materials, and scope.
Where this comes from
Every figure is pulled from Seattle's public building-permit records and classified by the work described. Nothing is estimated or AI-generated. How the data works. The moment a Seattle homeowner adds a real receipt, this page upgrades to show what neighbors actually paid next to these permit values.
Paid for chimney repair in Seattle?
Add what you actually paid. It's anonymous, takes a minute, and turns this permit estimate into a real neighbor price the next homeowner can trust.
Add your price →